Series A5402-A5406/04
The type 54 solenoid valve is servo-controlled. The sealing element is a metal piston or flat disk with ring-shaped seat sealing. The piston is guided into the valve bonnet by means of special PTFE piston guids and grooved rings. This is a robust valve type which is suitable for high pressures and for a large field of application as many different sealing materials have been used. A differencial pressure 0,5 bar between inlet and outlet is required for the operation. Valve is sensor-ready, configurable with end position detection as option -6H or for retrofitting.
Link to this productTechnical informations
Connections | DN20, DN25, DN32, DN40, DN50, DN15 |
Pressure | Min: 1 bar, Max: 16 bar |
Temperature | Min: -10 °C, Max: 80 °C |
Media | Fuel Oil Gasoline, Dieseloil, Fuels Oxygen O2 Ethanol Water, H2O Air Methane CH4 Acetone CH3COCH3 |
Housing materials | EN-GJL250 grey cast |
Sealing | FKM EPDM NBR PTFE |
Type of Control | Electrically servo-assistent |